Showing posts with label english. Show all posts
Showing posts with label english. Show all posts

Monday, March 24, 2014

ESB




I bought a bunch of EKG hops in my last big hop buy with the intention of doing an English IPA. I figured I would grow a culture of WLP002 by brewing a smaller batch of ESB, rather than doing a 5L starter or whatever it would take me to make enough yeast for a bigger beer from a vial. I also wanted to have something tasty and sessionable around as the weather breaks. 

I've never done an ESB before, but I have done several batches of Welsh Pale Ale. This recipe reminded me of that beer quite a bit albeit with considerably more bitterness.

I'm using a combination of hop extract and EKG to get to the bitterness that I want to. In Mitch Steele's IPA book, he mentioned that English brewers would often bag their hops and pull them out after 30 minutes because they found that a longer boil extracted harsher flavor. I figured I could accomplish something like this by combining EKG bittering addition with a calculated amount of extract. I added 3.8 ml of extract and 2 oz of EKG at 30 minutes. According to HopUnion's extract calculator, that will give me 30 IBU in extract and according to Beersmith, I'll get 10 IBU from the 2oz of EKG at 30 minutes. That will put me at just north of 40 IBU once you throw in the knockout hops.

Brew notes:

Treated strike water with campden, 10g gypsum, and 10g calcium chloride for a target water profile of:

Calcium: 117
Magnesium: 5
Alkalinity as CaCO3: 69
Sodium: 20
Chloride: 117
Sulfate: 131
RA as CACO3: -18


I'm seeking balance in the chloride/sulfate ratio and plenty of calcium. The 20g split between calcium chloride and gypsum got me where I wanted to be with my RA without using acid. The next time I brew this, depending on how this one turns out, I will dial back or the calcium chloride and/or gypsum and use a lactic acid addition to compensate and keep my pH where I want it to be.

Mash pH 5.35.

Mashed for 70 minutes at 152, then raised the temperature to 168. I paid particular attention to may sparge temperature for this beer to see if that helped in my extract efficiency. I knew I left some extract in the mash tun on my last DIPA and I wondered if this was the culprit.

Transferred ~14 gallons of wort to the boil kettle. There was still a bit of wort left in the mash tun that couldn't fit comfortably in the kettle. Tasting it, the wort was tannic and not very sweet. The leftover wort was dumped with the spent grain.


Set the timer for a 70 minute boil, added hops and extract at 30 minutes, added rehydrated irish moss and yeast nutrient at 15 minutes, and knockout hops at flameout.

Chilled to 64 degrees, oxygenated for 120 seconds, pitched 2.5L of WLP 002.

OG: 1.048 @ 12 gallons.


Recipe: 

Batch size: 12 gallons
Estimated OG: 1.048 SG
Estimated Color: 7.2 SRM
Estimated IBU: 41.0 IBUs
Boil Time: 60 Minutes

Ingredients:
------------
Amt                   Name                                     Type          #        %/IBU         
10.00 g               Calcium Chloride (Mash 60.0 mins)        Water Agent   1        -             
10.00 g               Gypsum (Calcium Sulfate) (Mash 60.0 mins Water Agent   2        -             
16 lbs                Pale Malt, Maris Otter (3.0 SRM)         Grain         3        84.2 %        
2 lbs                 Munich I (Weyermann) (7.1 SRM)           Grain         4        10.5 %        
1 lbs                 Caramel Malt - 60L (Briess) (60.0 SRM)   Grain         5        5.3 %         
3.00 oz               Hop Extract [10.00 %] - Boil 30.0 min    Hop           6        30.8 IBUs     
2.00 oz               Goldings, East Kent [5.00 %] - Boil 30.0 Hop           7        10.3 IBUs     
3.80 ml               CO2 Hop Extract (Boil 30.0 mins)         Other         8        -             
2.00 oz               Goldings, East Kent [5.00 %] - Steep/Whi Hop           9        0.0 IBUs      
1.0 pkg               English Ale (White Labs #WLP002) [35.49  Yeast         10       -             


Mash Schedule: Temperature Mash, 1 Step, Medium Body
Total Grain Weight: 19 lbs
----------------------------
Name              Description                             Step Temperat Step Time     
Saccharification  Add 23.75 qt of water at 163.7 F        152.0 F       60 min        
Mash Out          Heat to 168.0 F over 10 min             168.0 F       10 min        

Sparge: Fly sparge with 11.54 gal water at 168.0 F


Tuesday, July 30, 2013

Apartment brew series - Stormy Night English Dark Mild

I brewed an English Dark Mild last week in my apartment. It's something I've wanted to do for awhile, but kept putting off for brewing on my big boy system. I'd like to have a series of 5 gallon batches bottled on hand at the apartment. Basically, I want to relax, brew, bottle, and be able to watch my beer through the whole process, rather than stress about it being 30 minutes away. There was something truly nice about being done with a brew in 3.5 hours and on the couch relaxing.

 I haven't done this in awhile...

 Thanks to Gregg at the Pumphouse for this sample of Mangrove Jack yeast. Rehydrated according to online instructions.

 Added the DME right before the boil.

 I think I'll have to stick with 3-4 gallon boils. My electric range stove was just about perfect for this volume. Boiled for 60 minutes with three additions of Fuggles.

 I like to think Ben would be happy with the brew. He had an affinity for English Ales.

After 5 minutes of manual aeration/workout.

 Collected a little more wort than I wanted, but no big deal. 1.052 @ 6 gallons.

A giant igloo cooler, check. Frozen jugs, check. Kickass consistent ale ferment temperature, check. Fermented at 65 degrees for 3 days, then let it sit in our ambient apartment ~70 degrees.

Update: 8/22/2013 - Two weeks ago I set myself up to bottle until I realized that my fermentation got stuck around 1.020. I pitched a full sachet of Danstar Windsor Ale yeast and gave it another two weeks. I didn't see any fermentation activity in my bubbler, so I assumed it was just stuck and I'd bottle it despite its high FG. Well, last night I realized that the bucket lid wasn't on all the way... It tasted more mature, but I didn't sense oxidation, so I bottled it with Muntons carbonation tabs @ 1.012 FG.

BeerSmith 2 Recipe Printout - http://www.beersmith.com
Recipe: Stormy Night English Dark Brown
Brewer: Adam Keck
Asst Brewer: 
Style: Northern English Brown Ale
TYPE: Extract
Taste: (30.0) 

Recipe Specifications
--------------------------
Boil Size: 3
Post Boil Volume: 5.73 gal
Batch Size (fermenter): 5.00 gal   
Bottling Volume: 4.78 gal
Estimated OG: 1.053 SG
Estimated Color: 21.5 SRM
Estimated IBU: 27.3 IBUs
Brewhouse Efficiency: 65.00 %
Est Mash Efficiency: 0.0 %
Boil Time: 60 Minutes

Ingredients:
------------
Amt                   Name                                     Type          #        %/IBU         
8.0 oz                Caramel/Crystal Malt - 40L (40.0 SRM)    Grain         1        7.1 %         
8.0 oz                Chocolate Malt (350.0 SRM)               Grain         2        7.1 %         
6 lbs                 Amber Dry Extract (12.5 SRM)             Dry Extract   3        85.7 %        
1.00 oz               Fuggles [4.50 %] - Boil 60.0 min         Hop           4        16.1 IBUs     
1.00 oz               Fuggles [4.50 %] - Boil 15.0 min         Hop           5        8.0 IBUs      
1.00 oz               Fuggles [4.50 %] - Boil 5.0 min          Hop           6        3.2 IBUs      
1.0 pkg               Newcastle Dark Ale (Mangrove Jack #MO3)  Yeast         7        -